Elasticity

A sandbox’s memory, CPU, and workspace disk can be resized at runtime. The platform’s recommended path is Autoscaling — opt the sandbox in once and we resize it for you based on observed memory pressure. Lower-level controls are also available if you want to drive sizing yourself or freeze it. Autoscale covers memory + CPU. Disk is manual only — grow it explicitly via scale({ diskMB }) when your workload needs more room. The new size persists across hibernate, wake, fork, and migration. CPU scales proportionally to memory in all modes (1 vCPU per ~4 GB up to 16 GB / 4 vCPU). The permissible memory tiers are:

Memory	vCPU
1 GB	1 (best-effort)
4 GB	1
8 GB	2
16 GB	4

If you want a sandbox to stay at a fixed size, see Locking Resources.

Autoscaling

Opt a sandbox into the per-sandbox autoscaler and the platform resizes it for you based on observed memory pressure. Autoscale is opt-in per sandbox and disabled by default. This is the recommended way to size a sandbox: turn it on once with bounds you’re comfortable with, then leave it. Manual scale and the in-VM API are escape hatches for cases where the autoscaler isn’t a good fit (e.g. you want a hard guarantee for a benchmark, or you’re scripting your own logic).

Enable

await sandbox.setAutoscale({
  enabled: true,
  minMemoryMB: 1024,
  maxMemoryMB: 16384,
});

await sandbox.set_autoscale(
    enabled=True,
    min_memory_mb=1024,
    max_memory_mb=16384,
)

oc sandbox autoscale sb-abc123 --on --min 1024 --max 16384

curl -sf -X PUT "$API/api/sandboxes/$SANDBOX_ID/autoscale" \
  -H "X-API-Key: $API_KEY" \
  -H "Content-Type: application/json" \
  -d '{"enabled": true, "minMemoryMB": 1024, "maxMemoryMB": 16384}'

minMemoryMB and maxMemoryMB must be values from the tier table above. The autoscaler keeps the sandbox between these bounds, in tier steps.

Behavior

Scale up: when the sandbox’s 1-minute average memory utilization exceeds 75 %, jump to the next tier. 60-second cooldown between up-events.
Scale down: when all of the 1-min, 5-min, and 15-min utilization averages stay below 25 %, drop one tier. 5-minute cooldown between down-events. Down requires at least 15 minutes of low-utilization data, so a brief idle pause won’t shrink you.
Manual override: any explicit scale call disables autoscale on that sandbox. Re-enable explicitly via setAutoscale({ enabled: true, ... }) (or the equivalent in any SDK) if you want it back.

Disable

await sandbox.setAutoscale({ enabled: false });

await sandbox.set_autoscale(enabled=False)

oc sandbox autoscale sb-abc123 --off

curl -sf -X PUT "$API/api/sandboxes/$SANDBOX_ID/autoscale" \
  -H "X-API-Key: $API_KEY" \
  -d '{"enabled": false}'

Inspect

const cfg = await sandbox.getAutoscale();
// { sandboxID: "sb-...", enabled: true, minMemoryMB: 1024, maxMemoryMB: 16384 }

cfg = await sandbox.get_autoscale()
# {"sandboxID": "sb-...", "enabled": True, "minMemoryMB": 1024, "maxMemoryMB": 16384}

oc sandbox autoscale sb-abc123
# Autoscale enabled for sb-abc123 (1024–16384 MB)

curl -sf "$API/api/sandboxes/$SANDBOX_ID/autoscale" -H "X-API-Key: $API_KEY"
# {"sandboxID":"sb-...","enabled":true,"minMemoryMB":1024,"maxMemoryMB":16384}

Manual Scaling (Control Plane)

When you want to resize once — predictable size for a benchmark, a one-off scale-up before a known-heavy task, an operator response to an alert — call scale from your application or operator tooling. Any subset of memoryMB and diskMB may be supplied; unspecified dimensions are left alone. Combining them in one call applies both changes atomically and records a single billing event.

// Resize memory only
await sandbox.scale({ memoryMB: 4096 });

// Grow workspace disk only
await sandbox.scale({ diskMB: 40960 });

// Both at once (atomic)
await sandbox.scale({ memoryMB: 8192, diskMB: 61440 });

await sandbox.scale(memory_mb=4096)
await sandbox.scale(disk_mb=40960)
await sandbox.scale(memory_mb=8192, disk_mb=61440)

oc sandbox scale sb-abc123 4096              # memory only
oc sandbox scale sb-abc123 --disk-mb 40960   # disk only

curl -sf -X POST "$API/api/sandboxes/$SANDBOX_ID/scale" \
  -H "X-API-Key: $API_KEY" \
  -H "Content-Type: application/json" \
  -d '{"memoryMB": 8192, "diskMB": 61440}'

A manual memory scale disables autoscale on the sandbox — explicit user intent overrides the loop. Re-enable it later if you want size to track load again. A disk-only scale leaves autoscale alone (autoscale doesn’t drive disk).

Disk sizing behavior

Disk grow completes in ~1–2 seconds — the qcow2 backing file is extended and the ext4 filesystem is resized online without pausing the guest. The new size persists through hibernate, wake, fork, and migration; nothing you need to do afterwards. Billing. Disk over the 20 GB included allowance is billed at $0.0000001 per GB-second (≈$ 0.26 per GB-month) for the lifetime of the sandbox — running or hibernated. Growing a sandbox to 40 GB and then hibernating it still meters the 20 GB overage. Shrink is guarded. A shrink is refused if the guest filesystem’s used bytes would leave less than a 500 MB safety margin below the new size. Free space inside the guest first (delete files, then wait for the fs metadata to settle) or fork to a smaller sandbox instead.

Response codes

403 scaling_locked — the sandbox is locked. See Locking Resources.
409 oom_floor — the requested memory size would force a guest OOM-kill because the current working set exceeds it. Free memory inside the guest, then retry.
409 sandbox_hibernated — the sandbox is hibernated. Call POST /wake first, then retry the resize.
shrink_refused — a disk shrink would leave less than 500 MB free above the guest’s used bytes.
402 Payment Required — the requested size exceeds your plan cap.

In-VM Scaling

Sandboxes expose an internal metadata API at http://169.254.169.254 that lets code inside the VM scale itself. Useful for workload-aware scripts where the workload knows its own demand better than the platform autoscaler can infer (e.g. “scale up before this build, back down after”).

This endpoint is only reachable from inside the sandbox. It is not exposed through the control plane API or SDKs.

Scale Memory

Send a POST to /v1/scale with the desired memory in MB. CPU is adjusted proportionally.

curl -s -X POST http://169.254.169.254/v1/scale \
  -H "Content-Type: application/json" \
  -d '{"memoryMB": 4096}'

Check Current Limits

curl -s http://169.254.169.254/v1/limits

Example: Rust Compilation

Rust builds are memory-hungry. You can alias cargo to scale up before compilation and scale back down after:

alias cargo='_cargo_scaled'
_cargo_scaled() {
  # Scale up to 16GB / 4 vCPU before build
  curl -sf -X POST http://169.254.169.254/v1/scale \
    -H "Content-Type: application/json" -d '{"memoryMB": 16384}'

  # Run the actual cargo command
  command cargo "$@"
  local exit_code=$?

  # Scale back down to 4GB / 1 vCPU
  curl -sf -X POST http://169.254.169.254/v1/scale \
    -H "Content-Type: application/json" -d '{"memoryMB": 4096}'

  return $exit_code
}

Add this to your sandbox’s ~/.bashrc or inject it via sandbox.exec.run so every cargo build, cargo test, etc. automatically gets the extra resources.

Example: Custom Scaling Loop

A simple shell script that monitors memory pressure and scales automatically. Useful when you want fine-grained control inside the sandbox itself; for the platform-managed equivalent see Autoscaling above.

#!/bin/sh
SCALE_API="http://169.254.169.254/v1/scale"
MIN_MB=1024
MAX_MB=8192
SCALE_UP_THRESHOLD=80
SCALE_DOWN_THRESHOLD=30
COOLDOWN=30
last_scale=0

while true; do
  mem_total=$(awk '/MemTotal/{print $2}' /proc/meminfo)
  mem_avail=$(awk '/MemAvailable/{print $2}' /proc/meminfo)
  usage_pct=$(( (mem_total - mem_avail) * 100 / mem_total ))
  total_mb=$((mem_total / 1024))
  now=$(date +%s)
  elapsed=$((now - last_scale))

  if [ $usage_pct -gt $SCALE_UP_THRESHOLD ] && [ $elapsed -gt $COOLDOWN ]; then
    new_mb=$((total_mb * 2))
    [ $new_mb -gt $MAX_MB ] && new_mb=$MAX_MB
    if [ $new_mb -gt $total_mb ]; then
      echo "usage=$usage_pct% -> scaling UP to ${new_mb}MB"
      curl -sf -X POST "$SCALE_API" \
        -H "Content-Type: application/json" \
        -d "{\"memoryMB\":$new_mb}"
      last_scale=$now
    fi
  elif [ $usage_pct -lt $SCALE_DOWN_THRESHOLD ] && [ $total_mb -gt $MIN_MB ] && [ $elapsed -gt $COOLDOWN ]; then
    new_mb=$((total_mb / 2))
    [ $new_mb -lt $MIN_MB ] && new_mb=$MIN_MB
    if [ $new_mb -lt $total_mb ]; then
      echo "usage=$usage_pct% -> scaling DOWN to ${new_mb}MB"
      curl -sf -X POST "$SCALE_API" \
        -H "Content-Type: application/json" \
        -d "{\"memoryMB\":$new_mb}"
      last_scale=$now
    fi
  fi

  sleep 5
done

Locking Resources

If you want a sandbox to stay at a fixed size — predictable billing, a benchmark, a long-running pinned workload — lock it. Locking blocks both manual scaling and autoscaling on the sandbox.

await sandbox.setScalingLock(true);

await sandbox.set_scaling_lock(True)

oc sandbox lock sb-abc123

curl -sf -X PUT "$API/api/sandboxes/$SANDBOX_ID/scaling-lock" \
  -H "X-API-Key: $API_KEY" \
  -H "Content-Type: application/json" \
  -d '{"locked": true}'

While locked:

scale returns 403 scaling_locked
setAutoscale({ enabled: true }) returns 403 scaling_locked
The autoscaler skips the sandbox

Locking automatically disables autoscale on the sandbox, so you have a single user-facing toggle. Unlocking does not auto-re-enable autoscale; turn it back on explicitly if you want it.

// Unlock
await sandbox.setScalingLock(false);

// Inspect
const lock = await sandbox.getScalingLock();
// { sandboxID: "sb-...", locked: false }

# Unlock
await sandbox.set_scaling_lock(False)

# Inspect
lock = await sandbox.get_scaling_lock()
# {"sandboxID": "sb-...", "locked": False}

oc sandbox unlock sb-abc123
oc sandbox lock-status sb-abc123

# Unlock
curl -sf -X PUT "$API/api/sandboxes/$SANDBOX_ID/scaling-lock" \
  -H "X-API-Key: $API_KEY" \
  -d '{"locked": false}'

# Inspect
curl -sf "$API/api/sandboxes/$SANDBOX_ID/scaling-lock" -H "X-API-Key: $API_KEY"
# {"sandboxID":"sb-...","locked":false}

Getting Started

Sandboxes

Browser Sessions

Durable Agent Sessions

Reserved Capacity

CLI

Guides

TypeScript SDK

Python SDK

CLI Reference

API Reference

Resources

Autoscaling

Enable

Behavior

Disable

Inspect

Manual Scaling (Control Plane)

Disk sizing behavior

Response codes

In-VM Scaling

Scale Memory

Check Current Limits

Example: Rust Compilation

Example: Custom Scaling Loop

Locking Resources

​Autoscaling

​Enable

​Behavior

​Disable

​Inspect

​Manual Scaling (Control Plane)

​Disk sizing behavior

​Response codes

​In-VM Scaling

​Scale Memory

​Check Current Limits

​Example: Rust Compilation

​Example: Custom Scaling Loop

​Locking Resources

Autoscaling

Enable

Behavior

Disable

Inspect

Manual Scaling (Control Plane)

Disk sizing behavior

Response codes

In-VM Scaling

Scale Memory

Check Current Limits

Example: Rust Compilation

Example: Custom Scaling Loop

Locking Resources